Filter
Top Products
Topcom Diablo 150/Twin/Triple/Quattro 11
Topcom Diablo 150/Twin/Triple/Quattro
ENGLISH
9.4.1 To enter the remote operation
•Call your machine.
• The answering machine picks up the line, you hear the outgoing message and a beep.
• After the beep, press ‘*’ long. The unit will ask to enter the VIP code.
• Slowly dial the Security code (default 123).
•If the Security code is incorrect, the unit will confirm and ask you to re-enter. If the Security code is
correct and the unit has new messages, it will start to pronounce the amount of new messag
es an
also play them. When all messages are played, the unit will ask you to press ‘5’ to delete current
played messages, or ‘1’ to hear main menu.
•If the unit doesn’t have any new messages, it will say so and ask you to press ‘1’ for main menu.
10 Troubleshooting
11 Technical Data
Range: up to 300 m in open space
up to 50 m in buildings
Dialling options: DTMF (tone) and Pulse
Batteries: 2 x 1.2V, 550 mAh AAA Type NiMH rechargeable
Max. standby time: approx. 100 hours
Max. talk time: 10 hours
Ambient temperature: +5 °C to +45 °C
Permitted relative air humidity: 25 to 85 %
Power supply base adapter: 220/230V , 50 Hz
Memories 10 indirect w ith max. 2 5 digits
visit our website
www.topcom.net
U8006635
Problem Possible cause Solution
No displayBatteries not charged Check the position of the
batteries
Recharge the batteries
No dialling tone Telephone cable not properly
connected
Check the connection of the
telephone cable
Volume of conversation
partner too low
Adjust the volume during the
conversation by pressing the
volume key
Handset ringer volume too lowAdjust the ringer volume
Not possible to dial a number Wrong dia
l mode See “Setting the Dial mode” on
page 6