Filter
Top Products
Topcom Butler B3500/3501 Multi Handset 13
Topcom Butler B3500/3501 Multi Handset
ENGLISH
7. Press OK
8. Select ON to activate, OFF to deactivate
9. Press OK to confirm.
4.4.2 Lo
w battery
Proceed as before, but select at point 6 "LOW BATTERY" instead of "KEYTONE".
4.4.3 Handset out of rang
e
Proceed as before, but select at point 6 "OUT RANGE" instead of “KEYTONE".
4.5 HANDSET NAME
This function allows you to personalise each handset.
1. Enter the menu by pressing /OK
2. Select HANDSET using the up and down keys
3. Press OK
4. Select NAME using the up and down keys
5. Press OK
6. Enter the name
7. Press OK to validate
While entering the name, press ‘c’ to delete a character and press and hold to exit the menu without taking any
modifications into account.
4.6 AUTOMATIC ANSWER
When there is a incoming call and the handset in on the base, the phone automatically takes the line when lifted. This
is the default setting, but can be set OFF:
1 Enter the menu by pressing /OK
2 Select HANDSET using the up and down keys
3 Press OK
4 Select AUTO ANSWER using the up and down keys
5 Select ON (for automatic answer) or OFF
6 Press OK
WARNING! Returning to default settings will delete all entries in the phonebook and call log.
The PIN code will also be reset to 0000
4.7 KEYPAD LOCK
The keypad can be locked so that no settings can be changed or no telephone number can be dialed. The -icon will
appear on the screen when keypad is locked.
4.7.1 Loc
king the keypad by Menu
1 Enter the menu by pressing /OK
2 Select HANDSET using the up and down keys
3 Press OK
4 Select KEY LOCK? using the up and down keys
5 Press OK to lock the keypad
4.7.2 Loc
king the keypad by the *-key (quick lock)
Press and hold the ‘*’-key for 3 seconds. The keypad will be locked.
4.7.3 Unloc
k the keypad
1 Press any key
2PRESS * will appear on the screen
3 Press the ‘*’ key within 3 seconds to unlock the keypad
B3500_C.book Page 13 Monday, November 24, 2003 5:13 PM