Filter
Top Products
12 Topcom Butler B3500/3501 Multi Handset
Topcom Butler B3500/3501 Multi Handset
4. PERSONALISATION
4.1 ADJUSTING THE RING VOLUME
4.1.1 Handset ringv
olume External/internal calls
The handset ringvolume for internal or external calls can be set separately:
1. Enter the menu by pressing /OK
2. Select HANDSET using the up and down keys
3. Press OK
4. Select INT RING VOL or EXT RING VOL using the up and down keys
5. Press OK
6. Select the desired volume (OFF or 1 to 3 )
7. Press OK to confirm or to return to the previous menu.
4.2 CHOOSING THE RING MELODY
The handsets can ring with a different melody according to whether the call is internal or external.
4.2.1 Handset melod
y, external call
1. Enter the menu by pressing /OK
2. Select HANDSET using the up and down keys
3. Press OK
4. Select EXT MELODY using the up and down keys
5. Press OK
6. Select the melody of your choice ( 1 to 3 ) using the up and down keys
7. Press OK to confirm or to return to the previous menu.
4.2.2 Handset melod
y, internal call
1. Enter the menu by pressing /OK
2. Select HANDSET using the up and down keys
3. Press OK
4. Select INT MELODY using the up and down keys
5. Press OK
6. Select the melody of your choice ( 1 to 3 ) using the up and down keys
7. Press OK to confirm or to return to the previous menu.
4.3 SPEAKER VOLUME DURING CALL
During conversation, press the up or down key to change the volume accordingly.
Note: The handsfree volume is also adjust together with the receiver in the handset as above described
(only B3501).
4.4 ACTIVATION / DEACTIVATION OF BEEPS
The handsets can emit beeptone when a key is pressed, when the batteries are low or when the handset is out of range.
4.4.1 K
ey pressed beeptone on/off
1. Enter the menu by pressing /OK
2. Select HANDSET using the up and down keys
3. Press OK
4. Select BEEP using the up and down keys
5. Press OK
6. Select KEYTONE using the up and down keys
Note: Every programmation is confirmed at the end by a double or single long beep. A double bleep
confirms the validation of your choice
A long bleep signifies that the modification has not been taken into account.
B3500_C.book Page 12 Monday, November 24, 2003 5:13 PM