Topcom BUTLER 1800T Cordless Telephone User Manual


 
4.15.9 Switching Off and On Warning Tones
You can choose whether your Butler 1800T emits a beep tone or not when pressing the keys (key-
pad tones), when the battery is almost empty or when the handset gets out of reach of the base set.
Select ‘Setup’ in the menu and press the OK key.
Select ‘Warning tones’.
Press the OK key.
Select the sound you want to activate or deactivate.
- ‘Key tone’ = you hear a tone when pressing any key.
- ‘Low battery’ = warning that your battery is almost empty.
- ‘Out of range’ = warning that the handset is too far away from
the base set.
Press the OK key.
Select ‘On’ to activate and ‘Off’ to deactivate the signal.
Press the OK key.
4.15.10 Entering a Name for the unit
This function allows you to give your phone a name. This name appears on the display when the
phone is in standby mode. The standard name is ‘Butler’.
Select ‘Setup’ in the menu and press the OK key.
Select ‘Name’ and press the OK key.
Enter the name using the alphanumerical keypad.
Press the OK key to confirm.
When entering the name, you can press the ESC key to correct possible mistakes.
If you keep pressing the ESC key, you leave the menu without making any adjustments.
4.15.11 Selecting the Base Set
If your handset is registered to several DECT base sets, you can select the base set you want to use.
You can also program automatic base set selection. Then the handset automatically chooses the base
set offering the best reception.
Select ‘Setup’ in the menu and press the OK key.
Select ‘Select base’ and press the OK key.
Select the base set you want to use and press the OK key to
confirm.
Note: The different base sets to which the BUTLER 1800T is registered, are indicated with a symbol.
14
Butler 1800T
Warning tones
key tone
Low battery
Out of range
Key tone
O f f
O n
S e t u p
Warning tones
Ring volume
Ear volume
S e t u p
Melody int.
Melody ext.
N a m e
N a m e
B U T L E R _
S e t u p
L a n g u a g e
Base ID
Select base
Select base
A u t o m a t i c
Basis 1
Basis 2