Filter
Top Products
Topcom Allure 300 9
Topcom Allure 300
ENGLISH
6.2.2 Memory capacity
The maximum capacity of the Allure 300 is 110 entries including names and numbers.
This number can be dedicated to the Phonebook and/or to the Caller ID list. In this setting
you have to select the capacity of the Phonebook.
Press or to select the phonebook memory ‘MAX DATABANK = XXX (default 032)’
Press to confirm the phonebook memory.
The Caller ID list memory size will be displayed briefly and the unit will go to standby mode.
7 Settings
7.1 Setting the language of the display text
When you did not change the language during initialisation, you can select it as follow:
• Press button for 3 seconds.
• Press or to select the desired display language.
• Press to go to the next setting.
If no button is pressed within 10 seconds, the unit will return to standby mode.
7.2 Setting the display contrast
You can select the desired contrast as follows:
• Press for 3 seconds, the display language is shown.
• Press again.
• Press or to select the desired display contrast.
• Press to go to the next setting.
If no button is pressed within 10 seconds, the unit will return to standby mode.
To have access to the memory setting, you have to remove the batteries
for more than 10 minutes. All stored information will be erased after
initialisation.
!!! Only the words on the 3rd line of the display will be indicated in the
selected language. In standby the display will indicate ‘ALL CALLS 000’
for indicating the number of stored calls in the call list only in English.