Filter
Top Products
12 Topcom Allure 300
Topcom Allure 300
8.3 Music on hold
It is possible to put the caller on hold during a conversation by pressing . You can now talk
freely without the caller hearing you. The caller will hear a digital melody. The melody can be
changed by pressing or .
Press again if you want to resume your conversation.
8.4 Ringer volume
When you receive a phone call, the unit will ring. The ring volume can be adjusted by means
of the Ring Volume switch at the side of the phone (Hi-, Lo-).
8.5 Flash Key
Press the to use certain services as ‘Call Waiting’ (if this service is provided by your
telephone company); or to transfer phone calls when you are using a telephone exchange
(PABX).
The flashtime can be selected by the switch at the side of the phone (100/300/600ms).
9 Caller ID
9.1 General information
When you have a subscription to the Caller ID service, the caller’s phone number and name
(when supported by the network) will appear on the display. If you saved the telephone
number with the name in the Phonebook, the programmed name will be shown on the display
(name tagging function).
9.2 Call list
The size of the call list has been set when initializing the telephone. The phone numbers you
have received more than once, will not be stored, but the repeat indicator REP will be
displayed. Every incoming number is saved in the Call List with indication of date and time.
In standby mode the number of new received calls is shown on the display ‘ALL CALLS 000’
(always English). The new message LED will blink until you have checked all new messages.
9.2.1 Scrolling through the Call List
• You can scroll through the Call list by pressing or .
• If no button is pressed within 15 seconds, you will return to standby mode.