Topcom 5710 Telephone User Manual


 
1
Safety instructions
English
1 Safety instructions
Only use the charger plug supplied. Do not use other chargers as this may damage the battery
cells.
Only insert rechargeable batteries of the same type. Never use ordinary, non-rechargeable
batteries. Insert rechargeable batteries so they connect to the right poles (indicated in the
battery compartment of the handset).
Do not touch the charger and plug contacts with sharp or metal objects.
The operations of some medical devices may be affected.
The handset may cause an unpleasant buzzing sound in hearing aids.
Do not place the basic unit in a damp room or at a distance of less then 1.5m away from a water
source. Keep water away from the handset.
Do not use the telephone in environments where there is a risk of explosions.
Dispose of the batteries and maintain the telephone in an environment-friendly manner.
As this telephone cannot be used in case of a power cut, you should use a mains-independent
telephone for emergency calls, e.g. a mobile phone.
2 Getting started
2.1 How to use this user guide
In this user guide, following method is used to clearify the instructions:
Key to press. This key can be a soft key (See ”2.4 Keys/Led”). When the soft key is a symbol, it
is shown in the left column. When the soft key is text, the left or right soft key is shown in the left
column and the text is shown in the right column between quotation marks.
2.2 Installing the base
For installation, do the following:
1 Plug one end of the adaptor into the outlet and the other end into the adaptor jack on the back
of the base.
2 Connect one end of the telephone cord with the wall phone jack and the other end to the bottom
of the base.
3 Put the telephone- and AC power line cord in the base guides as shown on picture 2A.
Text.......”display”.
Text that appears on the display of the phone