Filter
Top Products
22 Topcom Butler 4270/Twin/Triple/Quattro
Topcom Butler 4270/Twin/Triple/Quattro
8.2 Handset priority
Normally, if you have more than one handset registered to your base, they all ring at the
same time. However, you can set one of them to ring before the others, so that calls can
always be answered at one handset first.
•Press MENU then scroll with the Up/down key to Base settings menu and press
OK.
•Select Priority Call Alert menu and press OK.
•Select All Handsets to make all handsets ring together and press OK.
OR
Select which handset has to ring before the others and press OK. Select the number of
rings at the handset before the other handsets start ringing and press OK to confirm.
• Press to return to standby.
8.3 Line settings
8.3.1 Flash time
•Press MENU then scroll with the Up/down key to Base settings menu and press
OK.
•Select Flash time and press OK.
• Select 100, 250 or 600ms and press OK
• Press to return to standby.
8.3.2 Dial mode
There are two types of dialling modes:
• DTMF/Tone dialling (the most common)
• Pulse dialling (for older systems)
•Press MENU then scroll with the Up/down key to Base settings menu and press
OK.
•Select Dial mode menu.
•Select DTMF or Pulse and press OK
• Press to return to standby.
8.4 System PIN
The System PIN is used for registering and deregistering handsets and some other optional
settings. The default System PIN is 0000.
•Press MENU then scroll with the Up/down key to Base settings menu and press
OK.
•Select System PIN menu.
• Enter the correct PIN code and press OK
• Enter the new PIN code and press OK
• Re-enter the new PIN code for confirmation and press OK
• Press to return to standby.