Filter
Top Products
8 Topcom Butler 3100
ENGLISH
5.5 CALLING A MEMORY NUMBER
• Press the Memory button , followed by the number of the memory location (0-9).
• Press the Line button . The memory number will be dialled automatically.
• Press the Line button when you want to terminate the call.
5.6 MUTE FUNCTION
It is possible to deactivate the microphone during a conversation. Now you can speak openly without being heard by
your correspondent.
• Press the Mute button during a conversation. The microphone will be deactivated. The MUTE symbol
appears on the display.
• Press the Mute button again when you want to continue the conversation.
5.7 SETTING THE VOLUME
During a conversation you can set the volume by pressing the Volume button . You can set the volume alternatively
in Hi, Medium and Low.
5.8 PAGING
When you press the Paging button on the base unit, the handset emits a ringing signal for 30 seconds. This signal
helps you find a lost handset. Press any key to stop the ringing on a handset.
5.9 OUT OF RANGE WARNING
When the handset is out of the working range of the base unit during a conversation, the unit will emit a warning signal
to warn the user that he has to move closer towards the base unit.
5.10 FLASH BUTTON (R)
When you press the R button, also called flash or recall, the unit generates a line interruption (of 100 ms or 250 ms). It
gives you the possibility to use the special services of your telephone provider and/or to transfer calls when you have
a telephone exchange.
5.10.1 Setting the Flash time
• Press and hold the programming button until these 3 icons appears on the display
• Press ‘3’. Only appears on the display
• Press ‘1’ for 100ms or ‘2’ for 250ms flash time
• Press again to confirm the setting
5.11 SETTING THE RING VOLUME AND MELODY
5.11.1 Handset ring v
olume and melody
• Press and hold the programming button until these 3 icons appears on the display
• Press ‘1’. Only appears on the display
• Press 1 to 5 to select the melody. The melody will be played ones.
• Press the volume key repeatedly to adjust the ringer volume
• Press again to confirm the setting
Remark: You can turn the ringer volume of each individual handset ON or OFF by simply press and hold
the key in standby.
5.11.2 Base v
olume
You can set the volume high, low or Off:
• Press and hold the paging key
•One ring will be played to hear the volume. Press and hold the paging key again to select another volume.
• If you hear two beeps, the ringer is turned off.
R
R
R
B3100.book Page 8 Thursday, May 8, 2003 3:51 PM