Filter
Top Products
5.1.2 Call setup with dial preparation
• Enter the desired telephone number. An incorrect number can be
corrected by means of the Mute button . When you haven’t
pressed a button for 60 seconds, the number you’ve already
entered will disappear and the handset returns to standby mode.
•Press the Line button . The number will be dialled
automatically.
•Press the Line button when you want to terminate the call.
5.2 Incoming calls
• When a call comes in, the handset and base will start
to ring. The EXT symbol and the handset indicator LED will blink.
•Press the Line button to answer the incoming call.
• When you pick up the handset from the base unit you are
immediately connected to the caller. You do not need to press the
Line button .
5.3 Last number redial
• Press the Line button .
• Press the Redial button . The last number (with max. 20 digits)
will be dialled automatically.
• Press the Line button when you want to terminate the call.
5.4 Programming memory numbers
You can program 10 indirect numbers (of max. 20 digits) in the phone’s memory.
•Press the Memory button , followed by memory location (0-9).
• Enter the telephone number you wish to save on this memory
location.
•Press the Memory button . You will hear a confirmation tone.
Remarks :
• If you wish to insert a pause, press the Redial/Pause button /P on the
location where you want a pause
5.5 Calling a memory number
•Press the Line button .
•Press the Memory button , followed by the number of the
memory location (0-9).
• The memory number will be dialled automatically.
•Press the Line button when you want to terminate the call.
5.6 Mute function
It is possible to deactivate the microphone during a conversation. Now you can speak openly without being
heard by your correspondent.
•Press the Mute button during a conversation. The microphone
will be deactivated. The MUTE symbol appears on the display.
•Press the Mute button again when you want to continue the
conversation.
Butler 2600/DUO
32
B2600_DUO_scan.QXD 16-09-2004 09:54 Page 32