Filter
Top Products
Butler 2000 C
• Then “RETYPE” is shown
on the display.
• Enter the new PIN code
once again.
• Press the OK button to confirm and the
unit returns to the
“H-CHANGE PIN” menu.
6.7 The RFPI code
This function allows you to display the RFPI code.
The RFPI code is the identification code of the base
unit to which the handset belongs.
• Press the Function
button until “SHOW
RFPI” is displayed.
• Press the OK button.
• The RFPI Code is shown
on the display.
• Press the OK button,
the unit returns to the
“SHOW RFPI” menu.
6.8 Reset Handset
This function is used to reset the handset settings
to default values.
There are two possibilities :
1: RESET ALL
The babycall (direct call) number and all the
memory numbers are erased.
2: INITIALIZE
All default handset parameters have been reset.
Key click on
Ring volume level #9
External ring melody melody #4
Internal ring melody melody #7
Speaker Volume Middle
6.8.1 Resetting the handset
• Press the Function
button until “H-RESET”
is shown on the display.
• Press the OK button.
• On the display “PP PIN:”
is shown.
• Enter the PIN code and
press the OK button.
• “RESET ALL” is
displayed.
- If you want to erase all
current values, press the OK button.
- If you press the
Function button
“INITIALIZE” is shown
on the display.
54
54
RETYPE :
H--CHANGE PIN
SHOW RFPI
00004--00 1AB
SHOW RFPI
H--RESET
PP PIN :
RESET ALL
INITIALIZE
B2000C 10/9/01 11:32 am Page 54