Topcom 1200C Telephone User Manual


 
ENGLISH
59
The current status of the keypad appears on the display:
- ‘LOCK’: the keypad is locked
- ‘UNLOCK’: the keypad is not locked
Press the Up or Down key to make your selection.
Press the Programming key to confirm your selection.
4.20 Turning key click on/off
You can set the telephone to make a sound whenever you press a key.
Press the Programming key .
Press the Up or Down key repeatedly until ‘KEY SETUP’ appears on the display.
Press the Programming key .
Press the Up or Down key repeatedly until ‘KEY CLICK’ appears on the display.
Press the Programming key .
The current status appears on the display:
- ‘CLICK ON’: turn on key click
- ‘CLICK OFF’: turn off key click
Press the Up or Down key to make your selection.
Press the Programming key to confirm your selection.
4.21 Selecting a base unit
If your handset is subscribed to several base unit stations (max. 4) , you must select a base unit
because the handset can only communicate with one base unit at a time. There are two possibilities:
4.21.1 Automatic selection
If you set the handset to ‘automatic selection’, the handset will automatically choose the closest
base unit in standby.
Press the Programming key .
Press the Up or Down key repeatedly until ‘SETTING’ appears on the display.
Press the Programming key .
Press the Up or Down key repeatedly until ‘BASE SEL’ appears on the display.
Press the Programming key .
Press the Up or Down key repeatedly until ‘AUTO’ appears on the display.
Press the Programming key .
‘SEARCHING’ and the symbol appear on the display.
A signal sounds once the handset has found a base unit.
4.21.2 Manual selection
If you set the handset to ‘manual selection’, the handset will only choose the base unit you
have set.
Press the Programming key .
Press the Up or Down key repeatedly until ‘SETTING’ appears on the display.
Press the Programming key .
Press the Up or Down key repeatedly until ‘BASE SEL’ appears on the display.
Butler 1200C/1210C
HANDL. B1200C/1210C 30-03-2001 08:32 Page 59