Filter
Top Products
ENGLISH
47
1 INSTALLATION
Before you use the telephone for the first time, you must first make sure the battery is charged
for 20 hours. If you do not do this, the telephone will not work optimally.
For installation, do the following:
• Plug the adaptor into the outlet.
• Open the battery compartment (see below).
• Put the battery in the battery compartment and connect the battery connector to the handset
• Close the battery compartment.
• Leave the handset on the charger unit for 20 hours. The Charge indicator (LED) on
the charger unit will light up.
Battery indicator:
• The battery is fully charged.
• The battery is half drained (50%)
• The battery is low. When the battery is low, you will hear warning signals and the
battery symbol on the display will blink.
Butler 1200C/1210C
HANDL. B1200C/1210C 30-03-2001 08:31 Page 47