Filter
Top Products
10
SETTING THE INCOMING MESSAGE LENGTH
The unit announces the current message length. To
change, press NEXT or PREVIOUS. To set and go on to
the next item, press SET.
1. Press and release NEXT or PREVIOUS until the unit
announces and displays the correct incoming
message length.
2. Once the length is set, press SET to enter the security
code menu.
SETTING THE SECURITY CODE
The unit announces the current security code. To change,
press NEXT or PREVIOUS. To set and exit press SET.
1. Press and release NEXT or PREVIOUS to choose the
first digit. The unit announces all 3 digits, but only the
selected digit displayed, will change.
2. Once you have the desired first digit, press SET to
save it and move on to the second digit.
3. Press and release NEXT or PREVIOUS to choose the
second digit. Only the second digit displayed, will
change.
4. Once you have the desired second digit, press SET to
save it and move on to the third digit.
5. Press and release NEXT or PREVIOUS to choose the
third digit. Only the third digit displayed, will change.
6. Once you have the desired third digit, press SET to
save it. The answerer repeats all the settings.
NOTE: To exit any menu, press and release the ALL
or NEW buttons. Also, setup will cancel if no
buttons have been pushed within 30 seconds.
IMPORTANT: The setup settings will not be erased
even after a power outage.
NEW
button
ALL
button
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
*
OPER
0
#
TONE
MEM DIAL
STORE
FLASH
REDIAL
TAPELESS MESSAGE SYSTEM
PLAY / STOP
NEXTPREVIOUS
2 WAY/MEMO
ON/OFF
SET
VOLUME
+
_
NEWALL
ERASE
1
2
3
4
5
6
7
8
9
MIC
SET
button
PREVIOUS
button
NEXT
button