Filter
Top Products
Power-Up Screen
•
This screen is dis played only on power up, first use de -
fault and fac tory de fault.
•
The 1
st
up per right cor ner num ber dis plays the base’s soft -
ware re vi sion. The sin gle ver sion num ber in cre ments for
changes in op er a tional soft ware.
•
The 2
nd
up per right cor ner num ber dis plays the base’s
chan nel map (fre quency plan) ver sion. The sin gle ver sion
num ber in cre ments for changes in the chan nel map.
•
Once the power-up screen is dis played, it will change to
the op er at ing screen af ter a few sec onds.
Op er ating Screen
•
Screen is dis played af ter power-up screen.
•
Sys tem will re vert to this screen if no ac tiv ity is de tected
on the LCD dis play but tons af ter 3 min utes.
•
Screen dis plays cur rent sta tus of the sys tem.
Beltpack Ac tiv ity Code Def i ni tions:
7-5
Telex
RadioCom
SB10001SB10001
TM
C60001C60001
Group 03A
T1T1
44
R1R1
tx
On
On
Off
Ch B
TA A
Operating Screen
22
33
T1T1
22
no
no tx = No Beltpack Trans mit Car rier De tected
Off = Re ceiver is not se lected on front panel
Ch A = Beltpack au dio is on Chan nel A
Ch B = Beltpack au dio is on Channel B
Ch A&B = Beltpack au dio is on Chan nel A and B (TR-825 only)
TA A = Beltpack Chan nel B Talk Around Ac tive
TA B = Beltpack Chan nel A Talk Around Ac tive
TA A&B = Beltpack Chan nel A and B Talk Around Ac tive (TR-825 only)
SA = Beltpack Stage An nounce Ac tive
NOTE: Older ver sions of BTR-800 soft ware do not sup port the de tec tion of TR-825 “Ch A&B”
and “TA A&B” con trol tones.
Power-Up Screen