Filter
Top Products
10
7
Changing Modes of Operation:
Perform the following steps to change the mode of operation.
1. Both the Talk and Call indicators should be off and the headset should be connected
2. Press and hold the Talk key, then press and hold the Call key, then release both keys.
The Call indicator should now glow red. (The number of beeps heard in the headset
indicates the current mode of operation.)
3. Press the Call key to change to the next mode of operation. Each press of the Call key
will cause the BP-1002/BP-2002 to change to the next mode of operation.
4. When the desired mode is reached, press the Talk key to select that mode and exit the
mode changing function. (Beeps will be heard in the headset when the mode changing
function is exited. The number of beeps heard indicates the selected mode of
operation.)
NOTE: Each time the intercom system power is turned on, the beltpack will reset to the
default mode of operation (Mode 2).
hctiwS/repmuJ
rebmuN
noitcnuFhctiwSrorepmuJtluafeD
gnitteS
2PJdna1PJ
ETON dna1PJ:
ehtniebtsum2PJ
noitisopemas
tceleSrewoP
detrohs3&2sniP:rewoPenOlennahC
)detrohssyawla3&2snip,2001-PBnO(
3&2sniP
detrohs
detrohs2&1sniP
:rewoPowTlennahC
1WSmocoiduA/moC-raelC
®
noitarepOLAB
eniLdecnalaB/decnalabnU
3PJtluafednotfelebtsuM3&2sniP
detrohs
Table 2. Internal Switches and Jumpers
M
ODE
(
BEEPS
)
M
IC
K
ILL
A
UDIBLE
C
ALL
A
LERT
1delbasiDdelbasiD
)tluafeD(2delbanEdelbasiD
3delbasiDdelbanE
4delbanEdelbanE
Table 1. Operating Modes