Filter
Top Products
18
PPT 2700 Series
Performing a Hard Reset
A hard reset also restarts your PPT 2700 terminal, but erases all
stored records and entries. Therefore, never perform a hard reset
unless a soft reset does not solve your problem.
Note: You can restore any data previously synchronized with
your computer during the next ActiveSync operation.
See the PPT 2700 Cradle Quick Reference Guide or
the PPT 2700 Product Reference Guide.
To perform a hard reset:
1. Remove the battery cover.
2. While holding down the Function button, use the stylus (or
similar object without a sharp tip) to gently press the reset
button.
3. Replace the battery cover and press the Power button.
4. As the terminal initializes its unique Flash File system, the
Symbol splash screen displays for about a minute.
5. See Aligning the Screen on page 8 to perform an initial setup
of the terminal.
Note: With a hard reset, Formats, Preferences, and other
settings are restored to their factory default settings.
Reset
Button
Function
Button