Filter
Top Products
Programming Flash Timing
Flash timing can be programmed for different timing options listed below.
1. Position the handset in the Off-Hook position (lift the handset).
2. Press the “STORE” key for 2 seconds.
3. Press following keys on the keypad in the order shown:
For 100mS press "*" "1" "1", then “store”.
For 200mS press "*" "1" "2", then “store”.
For 300mS press "*" "1" "3", then “store”.
For 400mS press "*" "1" "4", then “store”.
For 500mS press "*" "1" "5", then “store”.
For 600mS press "*" "1" "6", then “store”.
For 700mS press "*" "1" "7", then “store”.
For 800mS press "*" "1" "8", then “store”.
For 900mS press "*" "1" "9", then “store”.
For 1000mS press "*" "1" "0", then “store”.
4. Place the handset cradle to the On-Hook position.
Programming Example for 100mS
Go Off hook with handset, press “store”, then “*”, then “1” to
enter the set up state, then “1”, then “store”. Place the
handset into cradle to the On hook Position.
NOTE: The Flash Timing default is 600mS
24