Filter
Top Products
8
Because it is necessary to cradle the
handset for 12 hours prior to connecting
it for use the first time, it is better to
leave the unit on a flat surface during
initial charge before attempting to hang it
on the wall.
1. Cradle the handset.
2. Connect the power supply adapter into
the base and then an AC outlet.
3. Allow phone to charge for 12
hours before using the first time.
The CHARGE/IN USE light comes on
indicating that the battery is charging.
4. After charging, plug the short phone
line cord into the phone jack on the
back of the unit and then to the wall
jack.
5. Attach the wall mount by inserting the
two tabs at the top and then snapping
the tab at the bottom into place.
6. Slip the mounting holes over the wall
plate posts and slide the unit down
firmly into place. (Wall plate not
included.)
WALL MOUNT INSTALLATION
1
2
3
PAGE / FIND
CHARGE
IN USE
PHONE NO.
1
2
3
4
5
6
7
8
9
0
CHARGE/
IN USE
light
4
5