Filter
Top Products
26
• Does the base need to be relocated?
• Charge battery.
• Make sure base is not plugged into an outlet
with another household appliance.
Unit beeps
• Place handset in base for 20 seconds to reset
the security code. If that doesn’t work, charge
battery for 12 hours.
• Clean charging contacts on handset and base
with a soft cloth, or an eraser.
• See solutions for “No dial tone.”
• Replace battery.
Memory Dialing
• Did you program the memory location keys
correctly?
• Did you follow the proper dialing sequence?
• Make sure TONE/PULSE switch is correctly set.
• Did you reprogram numbers into memory after
power outage or replacing battery?
BATTERY
If you experience any of the following problems, even after fully recharg-
ing the battery, you may need to replace the battery pack:
• Short talk time
• Poor sound quality
• Limited range
• CHARGE/IN USE light fails to light