Filter
Top Products
Basics
20
US
Do this
Press (HOLD).
The LINE 1 or LINE 2 button will flash slowly.
Press (LINE 1) or (LINE 2) to resume the
conversation.
Slide the VOL switch.
Press (FLASH).
Press (FLASH) again to return to the first caller.
See “Setting the ringer type” on page 26.
1 When you hear the phone ring,
• Press (LINE 1) or (LINE 2)
whichever button is flashing.
or
• Pick up the handset from the
base phone when the
handset is placed on the base
phone.
The corresponding line button
lights up, so you can know
which line is used.
2 When you are done talking,
press (OFF) or replace the
handset on the base phone.
The corresponding line button
goes off.
When calls come in on line 1 and
line 2 at the same time
The phone rings with the line which
comes in first. When you pick up
the handset from the base phone,
the line which comes in first will be
connected.
Receiving calls
Additional tasks
To
Put a call on hold.
Adjust the handset
volume
Switch to another call
(“call waiting” service*)
Turn on/off the ringer of
the handset
* You need to subscribe to the service from your telephone company.
(HOLD)
VOL
switch
(FLASH)