Sony SPP-ID970 Cordless Telephone User Manual


 
Getting Started
14
US
Step 4: Entering the area code (continued)
Notes
If the home area code is already entered, it appears on the display in step 4.
To enter a different home area code, see “To change the home area code”
below.
Do not allow more than 20 seconds to elapse between each step of the
procedure.
Tips
You may press Jog Dial instead of (PGM) in step 6.
To check the current home area code, perform steps 1 to 4. The home area
code appears on the display for about 20 seconds.
To change the home area code
1 Perform steps 1 to 4 on page 13.
The current home area code appears on the display.
2 Turn Jog Dial down to erase the current home area code.
3 Enter a new home area code using the dialing keys.
4 Press (PGM).
You will hear a long confirmation beep.
To enter the local area code (For 10 digits
phone numbers users)
If a call matches one of the local area codes you entered, the phone
number will be registered with 10 digits in the Caller ID list (area code
+ number). If a call does not match one of the local area codes you
entered, the phone number will be registered with 11 digits in the
Caller ID list (1 + area code + number). Some regions of the country
allow you to have more than one local area code. (Up to five local area
codes can be entered in this phone.)
1 Perform steps 1 to 3 on page 13.
2 Turn Jog Dial up to make ”LOCAL“ flash.
3 Press Jog Dial.
4 Select the number (”#1“ to ”#5“) to enter the
local area code by turning Jog Dial.
HOME LOCAL
#1 #2 #3 #4 #5