Sony BDV-E4100 Bluetooth Headset User Manual


 
18
US
BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100
4-446-733-11(1)
D:\NORM'S JOB\SONY HA\SO120029\BDV-
E6100_4100_3100_E2100\4446733111_US (U2)\040GET.fm
masterpage: Left
Getting Started
Installing all speakers in
front position
(Speaker layout: [All Front])
• Be sure to select the speakers layout setting
(page 41) according to your speakers
placement.
• Use caution when placing the speakers and/or
speaker stands attached to the speakers on a
specially treated (waxed, oiled, polished, etc.)
floor, as staining or discoloration may result.
• Do not lean or hang on a speaker, as it may fall
down.
You can install the speakers on a wall. For details,
refer to the supplied “Speaker Installation
Guide”.
Step 2: Connecting the
System
Do not connect the AC power cord (mains
lead) of the unit to a wall outlet (mains)
until all the other connections are made.
(BDV-E6100/BDV-E4100 only) To
assemble the speakers, refer to the supplied
“Speaker Installation Guide”.
When you connect other equipment with a
volume control, turn down the volume of the
equipment to a level where sound is not distorted.
Connect the speaker cords to match the
color of the SPEAKERS jacks of the unit.
When connecting to the unit, insert the
connector until it clicks.
Note
Tip
AD EBGCF
Note
Connecting the
speakers
Gray
(Surround right
speaker (R))
Purple
(Subwoofer)
White
(Front left
speaker (L))
Red
(Front right
speaker (R))
Green
(Center
speaker)
Blue
(Surround left
speaker (L))