Multipoint technology
Use Multipoint technology to connect your headset to two Bluetooth™ devices at the
same time. For example, if you connect your headset with two phones, you can
receive calls from both phones without having to disconnect and reconnect.
If you prefer that your headset connects to just one Bluetooth™ device at any given
time, you can use Singlepoint mode instead. Before pairing your headset with a new
device in Singlepoint mode, make sure that you disconnect it from other devices.
Multipoint mode consumes more battery power than Singlepoint mode.
To switch between Multipoint mode and Singlepoint mode
1
Make sure that the headset is turned off.
2
Put the headphones in your ears.
3
To enter Multipoint mode, press and hold down the volume up key while
turning on the headset. After Multipoint mode is activated, you will hear two
beeps.
4
To enter Singlepoint mode, press and hold down the volume down key while
turning on the headset. After Singlepoint mode is activated, you will hear one
beep.
In order to connect to both paired devices in Multipoint mode, you need to restart the
headset.
10
This is an Internet version of this publication. © Print only for private use.