Filter
Top Products
Section 1 – Getting Started
When you receive your SPA-1001 it should contains the following items:
1. SPA-1001
2. Power supply
3. Phone cable
4. Network cable
5. Quickstart guide
Setting up the hardware:
Step 1: Connect the power cable to your SPA-1001
Step 2: Connect the network cable from your SPA-1001 to your DHCP enabled modem/router
Step 3: Connect an analogue phone to the “Phone” port in the SPA-1001.
Step 4: Turn the power on
Step 5: Pick up the phone and dial **** (You should hear a voice saying Sipura Configuration Menu)
Step 6: Dial 110# (Write down the IP address that is returned) (See Appendix E for all phone menu options)
At this stage, you can choose whether to upgrade the firmware. The latest version of the
SPA-1001 firmware at the time of writing this document is
To upgrade the firmware see Appendix C.