Filter
Top Products
Appendix D – Setting up a Time Server and Daylight Saving Rules
You can configure the SPA-3000 to automatically retrieve the current date and time.
(Including daylight savings). To do this you will need to enter in a NTP server. Some providers will
provide you with one.
Change to the “System” tab
Primary NTP Server: au.pool.ntp.org
Change to the “Regional” tab
For NSW these settings seem to work:
Time Zone: GMT+11:00
Daylight Saving Time Rule: start=3/-1/7/3;end=10/-1/7/2;save=-1