Filter
Top Products
Using the schedule alarm
The Organizer schedule alarm sounds when the time for a scheduled
appointment or other item on the agenda arrives. To stop the alarm after
it starts beeping, simply press
II
. If
mj
is not pressed, the
alarm will stop automatically after approximately 20 seconds.
Setting the alarm to ring
The schedule alarm can be set for a scheduled appointment.
1) Select an agenda item and mark it for the alarm with
“&“.
2) Activate the alarm for that item with
“4
“.
Once an agenda item has been selected for an alarm and the alarm has
been turned on, the alarm will sound automatically and the relevant item
will be displayed even if the Organizer has been turned off. The alarm
can also be set to sound for secret items without displaying the item.
If you do not wish to have the alarm sound at that time, you can turn the
alarm off.
Setting the schedule alarm
First display the schedule item for which you wish to set the alarm and
press
1-j
-1
.
“&”
appears to the left of the starting time
for the scheduled item on the display, to indicate that the alarm has been
set for that item. You can also set the alarm while you schedule an item
on the agenda by pressing
m
ml-.
However, when you press
-1-1
while
“.P.”
is displayed,
the alarm will be canceled and
“&”
will disappear from the display.
For example, to set an alarm for a meeting scheduled on December 18
(“December 18, 1992, 10:00 AM-1 1:00 AM Meeting”) while entering the
schedule item:
1. Enter the date, time, and schedule detail.
1 SCHEDULE 1
m
I/
12 18 1992
[
SCHEDULE 1
FRl12/18/'92
10 [AM] 11
lO:OOAM-11
:OOAM
r7Gq
Meeting
Meet i ng
-
45