Sanyo CLT-D5883 Cordless Telephone User Manual


 
E6
GETTING
STARTED
Low Battery Alert
When the battery pack is very low and needs to be charged, the phone is
programmed to eliminate functions in order to save power. If the phone is not
in use, ¨
Low Battery
¨ appears on the LCD and none of the keys will operate.
If the phone is in use, ¨
Low Battery
¨ flashes and the handset beeps. Complete
your conversation as quickly as possible and return the handset to the base
unit for charging.
Cleaning the Battery Charging Contacts
To maintain a good charge, it is important
to clean the charging contacts on both the
handset and the base unit once a month.
Use a clean pencil eraser or superfine steel
wool. Avoid touching the cabinet area of
the phone or scratches may occur.
Caution: Do not use paint thinner, benzene,
alcohol, or other chemical products. Doing
so may discolor the surface of the
telephone and damage the finish.
Terminology
Talk Mode -
The handset is off the base and the TALK/FLASH key has been pressed,
enabling a dial tone.
Standby Mode -
The handset is not in use, off the base, and the TALK/FLASH key has not
been pressed. A dial tone is not present.
Even when the battery pack is not being used, it will gradually discharge over a long
period of time.
Note:
contacts
contacts
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page 6