Each keyset user can select any one of eight ring fre q u e n c i e s :
• While on-hook, press TRSF and then dial 111.
• Dial 1–8 or press the UP and DOWN keys to hear each tone.
• When you hear the tone that you pre f e r, press TRSF to save it.
CHANGE YOUR PASSCODE
F r om the factory, your station passcode is 1234. You can change your
station passcode whenever you desire.
• While on-hook, press TRSF and then dial 1 0 1.
• Dial your old passcode.
• Dial a new passcode (must be four characters). You can use 0–9,
✽ and #.
• Redial new passcode to verify. If successful, you will hear two beeps.
Four beeps indicate an incorrect code. (enter the code again.)
• Press TRSF to store new passcode.
SET ANSWER MODE
You can receive internal calls in one of three modes (see A n s w e r i n g
I n t e r com Calls under I n t e r com Calls for descriptions) :
• While on-hook, press TRSF and then dial 1 0 3.
• Dial 0 for Ringing, 1 for Auto Answer or 2 for Voice Announce.
• Press TRSF to store your selection.
41
CUSTOMIZING YOUR KEYSET
SELECT RING TONE
≈∞∆˘ 99.1.20 2:58 PM ∆‰¿Ã¡ˆ41