Samsung SGH-R220 Telephone User Manual


 
Change Barring Password: you can set and
change the call barring password obtained from your
service provider using this option. You must enter the
current password before you can specify a new one.
Once you have entered a new password, you are
asked to confirm it by entering it again.
Call Waiting
This network service enables you to be informed when
someone is trying to reach you during another call.
To set your call waiting options, proceed as follows.
1. Select the type of calls to which the call waiting
option is to be applied by pressing or
until the appropriate option is highlighted and
then press Select.
2. Press the Activate soft key to confirm your
settings.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
To deactivate specific call waiting settings, proceed
as follows.
1. Select the type of call to which the option applies.
2. Press the Deactivate soft key.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all
call waiting settings by
selecting the Cancel All option.
85
SSeettttiinnggss
84
SSeettttiinnggss
To set your call barring options, proceed as follows.
1.
Select the type of call barring required by pressing
or until the appropriate option is
highlighted and then press the Select soft key.
2. Select the type of calls to be barred by pressing
the or key until the appropriate option
is highlighted and then press the Select soft key.
3. Press the Activate soft key to confirm your
settings.
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
To deactivate specific call barring settings, proceed
as follows.
1. Select the call barring option to be deactivated.
2. Select the type of call to which this option applies.
3. Press the Remove soft key.
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all
call barring settings by
selecting the Cancel All option.