Filter
Top Products
System Server Setup
From the Main Setup Menu, the fifth item [5. SYSTEM SERVER SET UP] sets or
modifies settings related to registering the phone to the MCP. You can obtain this
information from your system administrator.The screen below is displayed.
You can set/modify the IP address of the MCP at the [1.SERVER IP ADDRESS] item.
The screen below is displayed when you enter the item. The server IP is the IP
address of the MCP2/MCP.
You can confirm the current IP address of the MCP at the LCD panel.The address
is left blank if it is not set. Use the dial buttons from [0]-[9], and [✱] to set the IP
address and press the SPEAKER button to save and exit. Select the [2. SERVER
ID] menu.Use the HOLD button to backspace.
You must input the ID assigned to your ITP phone.See your phone system admin-
istrator to get this value.Press the SPEAKER button to save and exit.Select the [3.
SERVER PASS] item.
You must input the password associated with your ID. See your phone system
administrator to get this value.Press HOLD to backspace.Press the SPEAKER but-
ton to save and exit.
Completion of Settings
From the main menu, select the seventh item [7. REBOOT] to save all modified
settings and reboot the ITP-5107S phone.
13
1.SERVER IP ADDRESS
INPUT SERVER IP ADDRESS
xxx.xxx.xxx.xxx
INPUT SYSTEM ID
INPUT SYSTEM PASSWORD
5107S_keyset.qxp 5/9/2006 9:56 AM Page 19