Filter
Top Products
28
PROGRAM KEYS
UP & DOWN - Select the extension number.
KEYPAD - Used to enter extender codes.
HOLD - Used to clear the displayed data.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press TRSF and then dial 107 [2
01] KEY EXTEND
Display shows the first station 01:CALL1
2. Dial the station number (e.g.,205) OR use [2
05] KEY EXTEND
UP or DOWN to scroll through the station 01:CALL1
numbers and press the right soft key to
move the cursor
3. Enter the key number (e.g.,18) OR use [205] KEY EXTEND
UP and DOWN to scroll through the keys 18:DS
and use the right soft key to move the
cursor OR press the key to be programmed
4. Dial the extender according to the list
above and the system will display your
selection
If there are no more entries,press
the left soft key to return to step 2
5. Press TRSF to store and exit programming [205] KEY EXTEND
OR press SPK to store and advance to the 18:DS207
next program
sys_screen.qxp 5/11/2006 6:26 PM Page 35
29
PROGRAMMING ACCOUNT CODES
This program is used to add or change account code entries.
PROGRAM KEYS
KEYPAD - Used to enter the account code (allowable digits 0–9).
UP & DOWN - Used to select entry number.
FLASH & TRSF - Used to view and change only the used entries.
SPK/RLS - Used to clear data.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press TRSF and then dial 708 ACCOUNT CODE
Display shows (0
01)
2. Dial the account code entry (e.g.,005) ACCOUNT CODE
OR press UP or DOWN to select the (0
05)
entry number and press the right soft
key to move the cursor
3. Enter the account code via the dial pad, ACCOUNT CODE
e.g., 1234 (maximum of 12 digits) and (005)1
23456789012
press the right soft key to move the
cursor back to step 2
4. Press TRSF to store and exit pro-
gramming OR press SPK to store and
advance to the next program
sys_screen.qxp 5/11/2006 6:26 PM Page 36