Filter
Top Products
22
iDCS KEYSETS
DS 5000 SERIES KEYSETS
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press TRSF and then dial 105 [201] SPEED DIAL
Display shows 00 :
2. Dial the station number (e.g.,205) OR [205] SPEED DIAL
press UP or DOWN to select the station 00
:
and press the right soft key to move the
cursor OR press the left soft key to go
to step 4
3. If the selected station has no speed dial [205
] SPEED DIAL
bins,this display will be shown and a new SPDBLK NOT EXIST
station may be selected
A
C
E
Transfer
Speaker
VOLUME
BDF
28D KEYSET,18D KEYSET
PROGRAMMABLE KEYS LAYOUT
8D KEYSET PROGRAMMABLE
KEYS LAYOUT
Transfer Speaker
AB
CD
EF
7S KEYSET PROGRAMMABLE
KEYS LAYOUT
CA
B
D
E
F
14D KEYSET PROGRAMMABLE
KEYS LAYOUT
CA
B
D
E
F
21D KEYSET PROGRAMMABLE
KEYS LAYOUT
CA
B
D
E
F
sys_screen.qxp 5/11/2006 6:26 PM Page 29
23
4. Dial the location number (e.g.,05) OR [205] SPEED DIAL
press UP or DOWN to select the location 05: _
and press the right soft key to move the
cursor OR press the left soft key to return
to step 2
5. Enter the trunk access code (e.g.,9) [205] SPEED DIAL
followed by the number to be dialed 05 : 9-4264100_
(e.g.,4264100) OR press the right
soft key to return to step 2 OR press the
left soft key to return to step 3 OR press
HOLD to clear an entry (if an error is made,
use the DOWN key to step back)
6. Press the F key to access Program Station
Speed Dial Names OR press TRSF to save
and exit programming OR press SPK to save
and advance to the next program
DEFAULT DATA: NO SPEED DIAL NUMBERS PROGRAMMED
PROGRAM PERSONAL SPEED DIAL NAMES
FOR OTHER STATIONS
Each individual station user can program his/her own names but in cases where it
is impractical or for single line telephone users, this program allows a system
administrator to view or change any station’s speed dial names.The station speed
dial codes are 00–49. Each station begins with ten numbers (00–09) and can be
assigned more in blocks of ten up to a maximum of fifty numbers.
PROGRAM KEYS
UP & DOWN - Used to scroll through extension numbers and speed dial bins.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next program.
HOLD - Used to clear previous entry.
ANS/RLS - Used to select ALL.
ACTION DISPLAY
1. Press TRSF and then dial 106 [2
01] SPEED NAME
Display shows 00:
sys_screen.qxp 5/11/2006 6:26 PM Page 30