Filter
Top Products
Samsung DCS Application Note No 15 - Issue 01 Page 6 of 8
For Further Information Call LSP Communications
Example
This example shows how two systems can be connected using an E&M Tieline. The programming for
this example is very basic. For more flexible and elaborate networking, LCR and VPN programming
may be used.
System A
Dial Numbering plan is changed so that all keysets are in the 200 range, no keysets in the 300 range.
Program the E&M Tieline in Trunk Group 3.
Program MMC 416 so the E&M Tieline is set to USE DID.
Program MMC 714 as follows:
DID Digit Digit Day Dest Night Dest
001 01 201 201
002 02 202 202
003 03 203 203
004 04 204 204
System B
Dial Numbering plan is changed so that all keysets are in the 300 range, no keysets in the 200 range.
Program the E&M Tieline in Trunk Group 2.
Program MMC 416 so the E&M Tieline is set to USE DID.
DID Digit Digit Day Dest Night Dest
001 01 301 301
002 02 302 302
003 03 303 303
004 04 304 304