Filter
Top Products
~ 16 ~
RTW-1000 Operational Manual
RESETTING THE POCKET PC
There are two options for resetting the Pocket PC.
SOFT-RESET
This option restarts the Pocket PC, without reinstallation being
necessary. A soft-reset is often used in order to reorganize the
memory. In doing so all programs that are running are interrupted
and the working memory is reinitialized.
Choose this option if your Pocket PC is not responding or working
properly.
Perform the soft-reset as follows:
1. If possible save the files that your Pocket PC has just been
processing.
2. Press the tip of the stylus into the soft-reset switch opening.
After a few seconds the Pocket PC displays the start screen.
Your configuration and your saved files will not be deleted.
HARD-RESET
Warning: A hard-reset deletes all data on your Pocket PC and causes
it to return to its initial state.
It is not necessary to install the software on your synchronization
computer again, however.
Perform the hard-reset as the following:
1. If possible, back up all the files needed from your Pocket PC. To
do this use the programs bundled with the Pocket PC (see
online help or the manual on CD).
2. Hold down the On/Off switch and carry out a soft reset.