Filter
Top Products
6
3 When the battery is fully charged, unplug the USB cable
or AC adapter from your headset.
Note: The first time you charge the battery, leave your
headset connected to the USB cable or AC adapter at least
two hours.
Note: When the battery charge is low, the red LED flashes
and an alarm sounds.
Turning your headset on or off
To turn on your headset:
• Press and hold (talk) for about three seconds. The
blue LED starts blinking.
Note: If you press and hold (talk) for six seconds, your
headset goes into pairing mode. For more information see
“Pairing your headset” on page 6.
To turn off your headset:
• Press and hold (talk) for about three seconds.
Pairing your headset
To pair your headset:
1 With your headset turned off, press and hold (talk)
for six seconds. The blue and red LEDs flash rapidly.
2 On your device, select either RF-BTHP01 or RF-BTHP02
from the list of discovered Bluetooth devices.
3 On your device, enter the password 0000 to pair your
headset.