Revolabs uc500 Telephone User Manual


 
FLX & Cisco UC500/CME Technical Note
2 | Page
voice register global
mode cme
source-address 10.1.1.1 port 5060 ----- IP used for SIP Registrar/Proxy
max-dn 1
max-pool 1
!
voice register dn 1
number 700 ----- Directory Number Assigned to the FLX
no-reg
!
voice register pool 1
id mac 0020.F735.0059 ----- MAC Address of the FLX
number 1 dn 1
dtmf-relay rtp-nte ----- RFC2833 DTMF Relay is the only method supported
username 700 password ext700 ----- Authentication Information
codec g711ulaw
no vad
!
end
This establishes a user called “700” with password “ext700”, using the extension “700” on the Cisco
UC500/CME series. You might try to remove some of the commands, like the dtmf-relay, or the codec.