Filter
Top Products
6
Battery compartment door
-
-
+
+
Battery clip
Battery
INSTALLING THE BATTERY
In the event of a power outage, a
9-volt battery (not included) enables
the phone to retain numbers stored in
memory and the clock to keep accu-
rate time. To install the battery:
1. Remove the battery compartment
door on the bottom of the unit by
removing the screw with a Phillips
screwdriver. Slide the door to the
right and lift it up.
2. Connect a fresh 9-volt alkaline
battery (not included). The large
and small contacts on the battery
clip and the battery will interlock.
Once connected, place the battery
inside the battery compartment.
3. Replace the battery compartment
door, then replace and tighten the
screw.
IMPORTANT: If a battery is not
installed during a power outage, the
phone will lose all the radio station
presets and alarm times.