Filter
Top Products
17
Regional Area Codes
Depending on your area, you may need to set regional area codes. These are needed in
order for the phone to determine the number format to display when a valid CID signal is
received. Calls received that match any of the regional area codes display as 10 digits. If
the number is not displayed correctly, the phone may not be able to dial back the number.
You can store up to 6 regional area codes.
You may need to use this feature if you have:
• Multiple ar
ea codes
• Overlapping area codes
• Areas that require 10-digit dialing.
1. Press the Menu button.
2.
Use the 5 or 6 button to scroll to PHONE SETTING.
3.
Press the Sel/Save button.
4.
Use the 5 or 6 button to scroll to REGIONAL CODE.
5.
Press the Sel/Save button.
6.
Use the 5 or 6 to scroll to desired code #.
7.
Use the touch-tone pad to enter the code. Press Delete to clear and re-enter all three
digits. Or
use the 3 or 4 navigation button to go to the incorrect digit, and retype in
the correct one.
8. When finished, press the Sel/Save button to save and return to REGIONAL CODE.
Flash Time
Depending on the services you have with the phone company, you may need to adjust the
flash timing. It can be set to 100ms or 600ms. The default is 600ms.
1.
Press the Menu button.
2.
Use the 5 or 6 to scroll to PHONE SETTING.
3.
Press the Sel/Save button.
4.
Use the 5 or 6 to scroll to FLASH TIME.
5.
Press the Sel/Save button.
6.
Use the 5 or 6 to scroll to the desired setting.
7.
Press the Sel/Save button to save. To start over, press the Exit button to return to the
PHONE SETTING menu.
Connections and Setup