Filter
Top Products
19
USING REDIAL
To quickly dial the last number dialed,
press
TALK
, then press
REDIAL
.
Notes:
• You can also press
REDIAL
on the
handset first, then press
TALK
.
• The redial memory holds up to 32
digits, so you can redial long-
distance as well as local numbers.
• The redial memory also holds pause
entries. See “Entering a Pause” on
Page 22.
• When you press
FLASH
and press
any number key, the redial memory
stores the number entered after
FLASH
, deleting any previous entry
(see “Using FLASH” on Page 18).
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services by following
these steps.
1. Be sure
DIAL MODE
is set to
P
.
2. Dial the service’s main number.
3. When the service answers, press
TONE
( ) on the handset. Any addi-
tional numbers you dial are sent as
tone signals.
4. When you hang up, the phone auto-
matically resets to pulse dialing.
USING PAGE/INTERCOM
You can use the TAD-797 as a two-way
pager and intercom between the base and
the handset. This is useful if the handset is
away from the base and you want to lo-
cate it, or if you want to have a conversa-
tion between someone with the handset
and someone at the base.
To page the base from the handset, press
INTCM.
Paging
Base
appears on the
handset display, and both the base and
handset ring. Press
SPEAKER
or
INTER-
COM
on the base to answer the page. The
handset display changes to
Intercom
.
43-797.fm Page 19 Monday, August 16, 1999 9:20 AM