Filter
Top Products
14
TURNING THE BASE’S
RINGER ON AND OFF
To turn off the base’s ringer, set
RINGER
on the back of the base to
OFF
. You can
still make or receive calls using this
phone, and telephones on the same line
and the TAD’s handset still ring when
there is an incoming call.
To turn on the base’s ringer, set
RINGER
to
ON
.
SETTING THE HANDSET’S
RINGER VOLUME
At any time except during a call, press t
or s to set the handset’s ringer volume.
The phone rings at the selected volume
and the display shows
Ringer
Low
or
Ringer
High
.
SETTING THE NUMBER
OF RINGS
Set
RING
TIME
on the side of the base to
3
,
5
, or
T/S
to select how long the TAD
waits to answer a call (3 rings, 5 rings,
or toll-saver).
Note:
If you plan to check messages by
long distance, set
RING
TIME
to toll-sav-
er (see “Using Toll-Saver” on Page 32).
SETTING THE DAY/TIME
You must set the day of the week and
time so the TAD can record the correct
day and time of each message.
Note:
If you wait more than 15 seconds
between each key press, the TAD exits
the time setting process. Start again at
Step 1.
1. Hold down
CLOCK
until the TAD
beeps. The TAD announces the cur-
rently set day and displays the day’s
number (
0
for Sunday,
1
for Mon-
day, and so on).
43-797.fm Page 14 Monday, August 16, 1999 9:20 AM