Radio Shack TAD-795 Answering Machine User Manual


 
8
1. Hold down
TIME
SET
until a number
from
1
7
(the day of the week) ap-
pears and the TAD announces the
currently set day.
2. To change the day of the week, re-
peatedly press
REPEAT
to move
backward or
SKIP
to move forward
until the TAD announces the desired
day of the week.
3. Press
TIME SET
. The TAD announc-
es the preset hour.
4. To change the hour, repeatedly
press
REPEAT
or
SKIP
.
5. Press
TIME
SET
. The TAD announc-
es the preset minute.
6. To change the minutes, repeatedly
press
REPEAT
or
SKIP
.
7. Press
TIME
SET
to confirm the set-
tings.
CL
appears, then the TAD
beeps and announces the day and
time.
To check the current day/time at any
time, press
TIME
SET
.
RECORDING THE
OUTGOING MESSAGES
Before the TAD-795 can answer calls
and record messages, you must record
an outgoing message (OGM). The TAD
lets you record two separate messages
of up to 32 seconds each, and it oper-
ates differently based on which mes-
sage you select.
OGM 1 – After playing your outgo-
ing message, the TAD records the
caller’s message.
OGM 2 (announce-only) – The TAD
plays your outgoing message, but
does not record a message.
If you plan to use the TAD’s
announce-only feature, OGM 2
should clearly state that the caller
cannot leave a message.
The TAD-795 lets you store messages
for up to four different users. It normally
records messages in mailbox 1, but a
caller can choose a different mailbox by
pressing
#
and its number (1–4) after the
outgoing message. Be sure your outgo-
ing message tells the caller how to
record a message for the desired mail-
box.
Hint:
Do not tell callers that you are out
of town or not home. Instead, say that
you cannot come to the phone right now.
Follow these steps to record your outgo-
ing message.
43-795.fm Page 8 Monday, August 16, 1999 9:07 AM