Filter
Top Products
14
OPERATION
MAKING AND RECEIVING
CALLS
To make a call, simply lift the handset
and press
TALK
. When you hear the dial
tone, dial the desired phone number or
memory number (see “Memory Dialing”
on Page 16).
To answer a call if the handset is on the
base, simply lift the handset and begin
your conversation. Or, if the handset is
away from the base, press
TALK
. The
TALK indicator on the handset and the
IN USE indicator on the base light.
To end a call, place the handset on the
base or press
TALK
. The TALK and IN
USE indicators turn off.
Note:
If you press
TALK
to hang up the
phone and the phone does not discon-
nect, move closer to the base and press
TALK
again or place the handset on the
base.
TALK
Indicator
IN USE
Indicator
SELECTING THE
CHANNEL
The ET-919 scans 20 channels (fre-
quency pairs used between the base
and the handset) and automatically se-
lects a clear channel each time you
make or receive a call.
If you hear other conversations or ex-
cessive noise during a call, press
CHAN-
NEL
to select a different channel. The
TALK indicator blinks while your phone
searches for a clear channel.
Note:
If the handset is too far from the
base, the channel might not change.
Move closer to the base and try again.
USING MUTE
The
MUTE
button on the handset lets
you talk to someone else in the room
without the person on the other end of
the phone line hearing your conversa-
tion.
43-1089.fm Page 14 Tuesday, August 17, 1999 3:24 PM