Radio Shack ET-910 Cordless Telephone User Manual


 
13
Notes:
• If the CHARGE indicator does
not light or blinks continuously
when you place the handset on
the cradle, be sure the battery
and AC adapter are correctly
and securely connected. Also,
check the charging contacts on
both the handset and base. If
the contacts are dirty or tar-
nished, clean them with a pencil
eraser.
If the handset is charged, and
the AC adapter is unplugged
from the AC outlet or the AC out-
let loses power, the handset
beeps intermittently until power
is restored to the base and the
security access-protection code
is reset. To turn off the handset
sooner so it stops beeping,
press
TONE
,
#
, or any num-
ber key (
0
-
9
).
If the base loses AC power and
the handset is away from the
base, place the handset on the
base for a few seconds after AC
power is restored. This resets
the security access-protection
code.
You can recharge the battery pack at
any time, but you must be sure to re-
charge the battery pack when the
handset’s PRIVACY/LOW BATT in-
dicator lights.
If the battery pack will not hold a
charge, replace it. We recommend
you replace the battery pack about
once a year.
Notes:
The first time you use your
phone after charging a new or
completely discharged battery,
the handset might not work or it
might sound an error tone when
you press
TALK
. If this happens,
replace the handset on the cra-
dle for about 5 seconds, then try
again.
About once a month, fully dis-
charge the battery. Otherwise, it
will lose its ability to fully
recharge, and you might have to
recharge and replace it more
often.
To fully discharge the battery,
keep the handset off the cradle
until PRIVACY/LOW BATT turns
on. Then return the handset to
the base and fully recharge the
battery.
Some deeply discharged batter-
ies take longer to charge. If
overnight charging is not suffi-
cient, try charging for up to 48
hours.
TALK INT.CM OFF
PRIVACY / LOW BATT
123
ABC
DEF
43-1085.fm Page 13 Tuesday, August 17, 1999 2:31 PM