Filter
Top Products
9
Note: If you do not have any special
telephone services, pressing
FLASH
during a telephone conversation might
disconnect your call.
USING REDIAL
To dial the last number dialed, press
TALK/HANG UP
, then
REDIAL
.
Notes:
• If you get a busy signal, you can
press
REDIAL
again without press-
ing
TALK/HANG UP
.
• If the phone line has Call Waiting or
requires extra time to get the dial
tone, one-touch redial might not
work. If so, press
FLASH
then
REDIAL
to redial the number.
• The redial memory holds 31 digits
for tone dialing and 32 digits for
pulse dialing.
• The redial memory does not store a
FLASH
entry or any keys you
pressed before
FLASH
.
USING TONE SERVICES
WITH A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services.
With
TONE/PULSE
set to
PULSE
, press
at the point where tone signals are re-
quired. Any additional numbers you dial
are sent as tone signals. The phone au-
tomatically resets to pulse dialing when
you hang up.
43-893.fm Page 9 Monday, August 16, 1999 2:23 PM