Filter
Top Products
7
3. Press any number other than
0
.
Note:
If your phone system requires
that you dial an access code (9, for
example) before you dial an outside
number, do not press the access
code either.
If the dial tone stops, you have
touch-tone service. If the dial tone
continues, you have pulse service.
4. If you have tone service, leave
TONE/PULSE
set to
TONE
. If you
have pulse service, set
TONE/
PULSE
to
PULSE
.
TURNING THE RINGER
OFF/ON
You can set
RINGER
on the side of the
dialer to
OFF
or
ON
. With
RINGER
set to
OFF
, the dialer does not ring, but you
can still make outgoing calls. If you hear
an extension telephone ring, you can
answer the incoming call on this phone.
USING THE BELT CLIP
Use the ET-893’s belt clip to hang the di-
aler on your waistband so you can carry
the dialer with you as you move around.
Note:
Remove the headset hanger be-
fore using the belt clip.
To attach the belt clip to the ET-893,
place the belt clip in the slot, then slide it
in the direction of the arrow until it locks
into place.
To remove the belt clip from the ET-893,
press the belt clip’s tab and slide it off in
the direction of the arrow.
43-893.fm Page 7 Monday, August 16, 1999 2:23 PM