Filter
Top Products
5
Note: Pressing another line button with-
out pressing
HOLD
disconnects the cur-
rent call.
To release a call from hold, press that
line’s button. You can also release a call
from hold by picking up any extension
phone on that line.
Using Redial
To quickly dial the last number dialed,
press
REDL
when you hear a dial tone.
Notes:
• The redial memory holds up to 32
digits. If you dial more than 32 digits,
the phone does not store any num-
bers.
• When the phone redials, it uses the
current dialing mode (tone or pulse).
For example, if you dialed a number
in pulse mode, and then set
TONE–
PULSE
to
TONE
, the phone redials
the number in the tone mode.
• You can redial a number on a line
other than the one you originally
dialed it on if you have the same
type of service on both lines.
Using Tone Services with a
Pulse Line
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special services by following
these steps.
1. Dial the service’s main number.
2. When the service answers, set
TONE–PULSE
to
TONE
. Any addi-
tional numbers you dial are sent as
tone signals.
3. When you finish the call, set
TONE–
PULSE
back to
PULSE
.
43-651.fm Page 5 Friday, August 13, 1999 10:51 AM