Filter
Top Products
12
PREPARATION
SETTING THE DIALING
MODE
Set
TONE/PULSE
on the back of the
base for the type of service you have
—
tone or pulse (rotary). If you are not
sure which type you have, do this test.
1. Set
TONE/PULSE
to
TONE
.
2. Lift the handset, press
TALK
, and
listen for a dial tone.
3. Press any number other than
0
.
Note:
If your phone system
requires that you dial an access
code (9, for example) before you
dial an outside number, do not
enter the access code.
If the dial tone stops, you have
touch tone service. Leave
TONE/
PULSE
set to
TONE
.
If the dial tone continues, you
have pulse (rotary) service. Set
TONE/PULSE
to
PULSE
.
TURNING THE RINGER
ON OR OFF
To turn off the handset’s ringer, set
RINGER OFF/ON
on the handset to
OFF
. To turn on the ringer, set it to
ON.
Note:
With the handset’s ringer off,
you can still make calls using the
phone. And you can receive calls if you
have another telephone on the same
line which rings when there is an in-
coming call.
43-1037.fm Page 12 Tuesday, August 17, 1999 10:05 AM