Filter
Top Products
14
Note: The redial memory holds up to
63 digits, so you can redial long-
distance as well as local phone num-
bers.
USING FLASH
Pressing
FLASH
sends the electronic
equivalent of a switchhook signal. Use
FLASH
with special phone company
services such as call waiting.
If you have call waiting, quickly press
and release
FLASH
to take an incom-
ing call without disconnecting the cur-
rent call. Quickly press and release
FLASH
again to return to the first call.
Notes:
• Pressing and holding down
FLASH
for at least 1 second dis-
connects the current call.
• Do not press
FLASH
to hang up
the phone.
• When you redial a phone number
that includes a flash entry, the
phone only redials the numbers
after
FLASH.
For example, if you
dial
1 2 3 4
FLASH 5 6 7
, pressing
REDIAL
only redials
5 6 7
.
• If you do not have any special
phone services, pressing
FLASH
might disconnect the current call.
USING TONE SERVICES
ON A PULSE LINE
If you have pulse service, you can tem-
porarily switch to tone dialing during a
call for banking services or computer
transactions.
Be sure
TONE/PULSE
on the back of
the base is set to
PULSE
. Dial the num-
ber as usual, then simply press on
the handset at the appropriate place in
the call to change to tone dialing. The
phone automatically returns to pulse
dialing when you hang up the call.
USING PRIVACY
If you do not want a person on the other
end of the line to hear you, press and
hold down
PRIVACY
on the handset.
The handset’s microphone is turned off
without ending the call. Release
PRIVA-
CY
to resume your conversation.
Note: You can still hear the person on
the other end of the line when you
press and hold down
PRIVACY
.
43-1037.fm Page 14 Tuesday, August 17, 1999 10:05 AM