Filter
Top Products
12
Notes:
•If
TONE/PULSE
is set to
PULSE
and you want to use tone dialing
for a memory number, you must
store the tone entry along with the
number.
• To keep your accounts secure, we
recommend you do NOT store
your personal access code for
services such as bank-by-phone
in a memory location.
Storing a Number in Memory
1. With the handset’s power on,
press
MEMORY
. The keypad lights
and
MEM
appears on the display.
Note: While you are storing a
number in memory, if you do not
press any button on the keypad
within about 9 seconds, the key-
pad light turns off and a buzz
sounds. You must press
MEMORY
again so the keypad lights before
you can store the telephone num-
ber.
2. Enter the phone number you want
to store. The number appears on
the display.
Notes:
• The phone does not dial the
number at this point.
• If you enter a wrong digit, press
FLASH/DEL
to delete the last
entered digit.
• If you enter more than 16 digits,
the phone buzzes and the dis-
play turns off. To dial a number
with more than 16 digits, see
“Chain Dialing.”
3. Press
MEMORY
again.
4. Enter the two-digit memory loca-
tion number (
01, 02 ..... 30
) where
you want to store the number. The
index number appears, and a long
beep sounds. The phone number
is now stored in the memory.
43-1032.fm Page 12 Tuesday, August 17, 1999 9:41 AM